大精旺自动化
专注 诚信
扫一扫关注微信
| DW-W2Q气动四芯轴压接工具 | ||||||
| 一、套装说明 |
|
|
|
|
|
|
| SUT DESCRIPTION |
|
|
|
|
|
|
| 1、此套装包含的≡≡YJQ-W2Q气动四芯轴压接工具用于高质量、高标准的压接要求。 |
|
|||||
| 2、此套装BM-2底座可自由调整摆放角度，操作便捷易懂╲，符合人体工程学》》。 |
|
|||||
| 3、此套装UH2-5定位器可适用多种端子的压接定位，轴线方向能自由调节端子的压接高度。 | ||||||
| 4、此套装使用气源←气压范围5.5-8.3BAR. |
|
|
|
|||
| 5、关键零部件公有︻制铬钒钢，真空热处理。经久耐用。 |
|
|
||||
| 6、此套装包含2种控制模式：①脚阀控制╱模式；②手动控制模式。 |
|
|
||||
|
|
|
|
|
|
|
|
| 1、This suit contains YJQ-W2Q four-indent cnimp tool used for high quality requirements. | ||||||
| 2、The base support BM-2 could be adjusted frddly ，easy to operat and understand. | ||||||
| 3、The containing Positioner UH2-5 could be compatiable with multiple contacts,easy and free to adjust the terminal position. | ||||||
| 4、The pneumatic control suit is used under Air pressure5.5-8.3BAR. |
|
|||||
| 5、Material containing chorme vanadium steel,processed by vacuum heat treatment. | ||||||
| 6、This kit contains two kinds of control mode:①Foot valve control model;②Hand valve control model. | ||||||
|
|
|
|
|
|
|
|
| 配置清单 CONFIGURATICN LIST | ||||||
| 序号 | 内部编号 | 型号 | 说明 | 数量 | ||
| NO | INTERNAL NUMBER | MCDEL(ARMYLABEL) | DESCRIPTICN | NUMBER | ||
| 1 | F1 | BM-2 | 底座 | 1 | ||
| 2 | P0301 | UH2-5(M22520/1-0.5) | 定位器 | 1 | ||
| 3 | Q3 | YJQ-W2Q(M22520/1-01) | 压接工具 | 1 | ||
| 4 | F2 | PC-SUITE1 | 气动组合套装 | 1 | ||
| 5 | F4 | 9/64Hex Wrench | 内六角扳手 | 1 | ||
| 6 | F5 | 8-32UNCx5/16screw | 螺钉 | 2 | ||
| 具体产品♂规格参数详见各产品规格说明书 | ||||||
在线咨询
联系电话：4008555825
